Софт Strong SRT 82

2) Release notes 
3) Update Instruction: 
a) At the PC: 
Extract the .bin file from the package to the root directory of the connected USB device. Then disconnect the USB device from the PC and connect it to the receiver. 
b) At the Receiver:
Switch ON your receiver and connect the USB device with the software file (in the root directory) to the USB connector on the Y-cable at the receiver.After the USB device has been successfully detected, you can perform the software update according to the following steps:
1. Press MENU button to enter Main Menu. Select System with the ◄► buttons and use ▲▼ to select Software Update then press OK to open this menu.
2. Now select USB Upgrade with ▲▼ and press OK.
3. After the update file has been detected correctly and successfully, the filename will be displayed. Use ▲▼ to select it and press OK to start the update process.
4. Now the receiver will reboot to “Upgrading…” screen with blue background. Please wait patiently until the receiver finished!

Following improvements were realised in this software version:
• Language set is changed. Add Polish and removed Slovakian language.
• Change the boot logo to new type
• If same double channels are found will the best Quality/Signal level store on LCN position.
• Gost picture in records from French broadcast, improved.
• New function to backup and load channel list from/to USB device.
• New function menu lock to protect access to menu.
• Support for new Raphael tuner R850
• 10 Languages in: English, Croatian, Czech, French, Italian, Portuguese, Spain, Greece, Hungarian, Polish.